Beschrijving
The iSOLde Licht CLEO HPA 400 S is specifically designed for the foldable Sunmobiel sunbeds from Philips and Hapro. This lamp replaces the Philips Cleo HPA 400 S. Need to replace your lamps? Then this is the lamp you need. The HPA lamps are easy to replace yourself, and your sunbed can last for 500 to 600 hours.
Which tanning beds is the HPA 400s suitable for?
The 400s is suitable for ALL Philips foldable Philips Sunmobile with 3 and 4 lamps. such as:
HB811, HB812, HB814, HB821, HB822, HB823, HB824, HB828, HB846, HB851, HB853, HB861, HB863, HB871, HB875, HB950, HB951, HB953, HB955, HB971, HB975, HB977, HP3132, HP3701 etc. Also for Hapro MobileSun HP8540 and Palm Beach Compactsun and some other devices.
NOTE: NOT suitable for the Philips Innergize, Hapro Innergize, and Alisun SunCar. You will need the iSOLDE Licht CLEO HPA Synergy lamp , which is shorter and has a lower wattage.
Length of this lamp is 11.8 cm .
Power 400 to 600 watts
Philips has stopped producing these lamps and has been acquired by iSOLde Licht GmbH. So, if you still have a Philips Cleo HPA 400 S lamp in your Sunmobiel, you can easily replace it with an iSOLde Licht HPA 400 S lamp. This is the exact same lamp, only now sold under the name iSOLde Licht.
Dimensions of the 400S:
Total length (A) 117.9 mm
Glass length (B) 106.5 (± 2) mm
Lighted length (C) 43 mm
Bulb diameter (D) Ø 16.9 mm
Ceramic base R7s
Bulb (quartz glass) FDA
Lamp voltage ULp. 130 V
Lamp wattage PLp. 400 W
Supply voltage 220 V 50 Hz
Starting voltage min. 3 kV
Initial phase 3 min.
Useful life approx. 1000 h